Browse Definitions :
Definition

volt per meter (V/m)

What is volt per meter (V/m)?

Volt per meter is the standard unit of electric field (E field) strength. Symbolically, it is represented as V/m. An E field of 1 V/m refers to a potential difference of 1 V between two points 1 m apart.

In base Standard International (SI) units, 1 V/m is the equivalent of 1 meter per kilogram per second cubed per ampere. This is represented as m . kg . s -3 . A -1.

Volt per meter explained

When electricity flows through an electrical conductor, it produces an electromagnetic field (EM field or EMF). This EMF contains both a magnetic (M) and electric (E) component. Volt per meter indicates the strength or intensity of the E field in the EM field. Simply put, if 1 V is applied between two infinite parallel planes spaced 1 m apart, the electric field strength is 1 volt per meter.

Example

Consider a parallel plate capacitor.

Situation 1

Suppose 1.5 V are applied across the capacitor whose plates are 1.5 m apart. The E field strength can be expressed in terms of V/m as the following:

E field = 1.5 V / 1.5 m = 1 V/m

Situation 2

Now, if the plates are moved toward each other so that the distance between them is 1 millimeter, the E field changes to the following:

E field = 1.5 V / 0.001 m = 1,500 V/m

Situation 3

The distance between the plates remains 1.5 m. However, a higher voltage (say 3 volts) is applied between them. The E field can now be measured as the following:

E field = 3 V / 1.5 m = 2 V/m

This example shows that volt per meter is affected by both the distance between the conductor's plates and the voltage applied between them.

The higher the source voltage, the higher the strength of the E field. This strength also decreases as the distance from the source increases and if there are shields, such as walls, houses or trees, in place.

Volt per meter is a vector quantity since it is characterized by both magnitude and direction.

Fractional and multiple values of volt per meter

In a distant radio transmitter, the magnitude of the E field is often much less than 1 V/m. In such cases, fractional units are preferred to represent it. The most commonly used fractional units are as follows:

  • Millivolt per meter
  • Microvolt per meter
  • Nanovolt per meter
  • Picovolt per meter

Figure 1 shows how these values convert to volt per meter.

Conversion to volt per meter table
Figure 1. How various values convert to volt per meter values

Multiples of volt per meter are represented as shown in Figure 2.

Conversion to multiples of volt per meter table
Figure 2. How multiples of volt per meter are represented for various fractional values

Volt per meter versus power in watts

The electric field created by the operation of a transmitter is usually represented in mV/m or uV/m. A watt is the unit that describes the amount of power generated by the transmitter.

A transmitter that generates constant power can produce E fields of different strengths, depending on the type of transmission line and antenna connected to it. In general, power and E field are related by the following formula:

(P. G) /(4 . π . d2) = (E2) / 120

The following explains the variables in the formula:

  • P = transmitter power (watts)
  • G = numerical gain of the transmitting antenna (for a unity gain antenna, G = 1)
  • d = distance of the measuring point from the electrical center of the antenna (meters)
  • E = field strength (V/m)
  • 4 . π . d2 = surface area of the sphere centered at the radiating source

The E field causes interference in radio communications. Also, it does not directly correspond to the level of transmitter power. This is why the emission limits of broadcasting transmitters and short-range devices are specified in field strength.

Volt per meter and newton per coulomb

A newton per coulomb (N/C) is also a unit of the strength of the electric field in the SI system. An E field of 1 N/C is created if 1 V is applied between two infinite parallel planes spaced 1 m apart.

Mathematically, the electric field can be represented as the following:

E = F/Q

The variables in this formula are as follows:

Q = charge present in space

F = force exerted by Q on any other charge in its vicinity

The SI unit of F is 1 Newton (N) and the unit of C is 1 coulomb (C).

So, E = 1 N/1C = NC-1.

At the same time, when a new charge q is in the vicinity of charge Q, a force of repulsion acts on q. This charge can be moved through a distance in the field by applying some work (W) on it. The work done per unit charge is the electric potential, which is represented as the following:

V = W/q

But also:

work = force x displacement = F . d

Therefore:

V = F . d/q = E . d = V/d

In SI units, the unit of electric potential is volt (V) and the unit of displacement is meter (m). Therefore, the unit of electric field is as follows:

E = (1 V)/(1 m) = V/m

From the above, we can see that 1 V/m is equivalent to 1 N/C. This is why both volts per meter and newtons per coulomb are used to represent the strength of an electric field.

See also: Table of Physical Units

This was last updated in June 2022

Continue Reading About volt per meter (V/m)

Networking
  • subnet (subnetwork)

    A subnet, or subnetwork, is a segmented piece of a larger network. More specifically, subnets are a logical partition of an IP ...

  • Transmission Control Protocol (TCP)

    Transmission Control Protocol (TCP) is a standard protocol on the internet that ensures the reliable transmission of data between...

  • secure access service edge (SASE)

    Secure access service edge (SASE), pronounced sassy, is a cloud architecture model that bundles together network and cloud-native...

Security
  • intrusion detection system (IDS)

    An intrusion detection system monitors (IDS) network traffic for suspicious activity and sends alerts when such activity is ...

  • cyber attack

    A cyber attack is any malicious attempt to gain unauthorized access to a computer, computing system or computer network with the ...

  • digital signature

    A digital signature is a mathematical technique used to validate the authenticity and integrity of a digital document, message or...

CIO
  • What is data privacy?

    Data privacy, also called information privacy, is an aspect of data protection that addresses the proper storage, access, ...

  • product development (new product development)

    Product development -- also called new product management -- is a series of steps that includes the conceptualization, design, ...

  • innovation culture

    Innovation culture is the work environment that leaders cultivate to nurture unorthodox thinking and its application.

HRSoftware
  • organizational network analysis (ONA)

    Organizational network analysis (ONA) is a quantitative method for modeling and analyzing how communications, information, ...

  • HireVue

    HireVue is an enterprise video interviewing technology provider of a platform that lets recruiters and hiring managers screen ...

  • Human Resource Certification Institute (HRCI)

    Human Resource Certification Institute (HRCI) is a U.S.-based credentialing organization offering certifications to HR ...

Customer Experience
  • What is an outbound call?

    An outbound call is one initiated by a contact center agent to prospective customers and focuses on sales, lead generation, ...

  • What is lead-to-revenue management (L2RM)?

    Lead-to-revenue management (L2RM) is a set of sales and marketing methods focusing on generating revenue throughout the customer ...

  • What is relationship marketing?

    Relationship marketing is a facet of customer relationship management (CRM) that focuses on customer loyalty and long-term ...

Close