Browse Definitions :
Definition

# alternating current (AC)

Also see current, voltage, and direct current.

In electricity, alternating current (AC) occurs when charge carriers in a conductor or semiconductor periodically reverse their direction of movement. Household utility current in most countries is AC with a frequency of 60 hertz (60 complete cycles per second), although in some countries it is 50 Hz. The radio-frequency (RF) current in antennas and transmission lines is another example of AC.

An AC waveform can be sinusoidal, square, or sawtooth-shaped. Some AC waveforms are irregular or complicated. An example of sine-wave AC is common household utility current (in the ideal case). Square or sawtooth waves are produced by certain types of electronic oscillators, and by a low-end uninterruptible power supply (UPS) when it is operating from its battery. Irregular AC waves are produced by audio amplifiers that deal with analog voice signals and/or music.

The voltage of an AC power source can be easily changed by means of a power transformer. This allows the voltage to be stepped up (increased) for transmission and distribution. High-voltage transmission is more efficient than low-voltage transmission over long distances, because the loss caused by conductor resistance decreases as the voltage increases.

The voltage of an AC power source changes from instant to instant in time. The effective voltage of an AC utility power source is usually considered to be the DC voltage that would produce the same power dissipation as heat assuming a pure resistance. The effective voltage for a sine wave is not the same as the peak voltage . To obtain effective voltage from peak voltage, multiply by 0.707. To obtain peak voltage from effective voltage, multiply by 1.414. For example, if an AC power source has an effective voltage of 117 V, typical of a household in the United States, the peak voltage is 165 V.

Nikola Tesla, a Serbian-American scientist, electrical engineer, and inventor, developed the alternating-current (AC) electrical system, as well as radio, the Tesla coil transformer, wireless transmission, and fluorescent lighting.

This was last updated in January 2011
• virtual network functions (VNFs)

Virtual network functions (VNFs) are virtualized tasks formerly carried out by proprietary, dedicated hardware.

• network functions virtualization (NFV)

Network functions virtualization (NFV) is a network architecture model designed to virtualize network services that have ...

• overlay network

An overlay network is a virtual or logical network that is created on top of an existing physical network.

• X.509 certificate

An X.509 certificate is a digital certificate that uses the widely accepted international X.509 public key infrastructure (PKI) ...

• directory traversal

Directory traversal is a type of HTTP exploit in which a hacker uses the software on a web server to access data in a directory ...

• malware

Malware, or malicious software, is any program or file that is intentionally harmful to a computer, network or server.

• chief transformation officer (CTO)

Chief transformation officer is an executive role, often in the C-suite, that focuses on bringing about change as well as growth ...

• data latency

Data latency is the time it takes for data packets to be stored or retrieved. In business intelligence (BI), data latency is how ...

• chief data officer (CDO)

A chief data officer (CDO) in many organizations is a C-level executive whose position has evolved into a range of strategic data...

• implementation

Implementation is the execution or practice of a plan, a method or any design, idea, model, specification, standard or policy for...

• first call resolution (FCR)

First call resolution (FCR) is when customer service agents properly address a customer's needs the first time they call.

• customer intelligence (CI)

Customer intelligence (CI) is the process of collecting and analyzing detailed customer data from internal and external sources ...

Close