BNC (Bayonet Neil-Concelman or British Naval Connector)

A BNC (Bayonet Neil-Concelman, or sometimes British Naval Connector) connector is used to connect a computer to a coaxial cable in a 10BASE-2 Ethernet network. 10BASE-2 is a 10 MHz baseband network on a cable extending up to 185 meters - the 2 is a rounding up to 200 meters - without a repeater cable. 10BASE-2 Ethernets are also known as "Thinnet", "thin Ethernet", or "cheapernets". The wiring in this type of Ethernet is thin, 50 ohm, baseband coaxial cable. The BNC connector in particular is generally easier to install and less expensive than other coaxial connectors.

A BNC male connector has a pin that connects to the primary conducting wire and then is locked in place with an outer ring that turns into locked position.

Different sources offer different meanings for the letters BNC. However, our most knowledgable source indicates that the B stands for a bayonet-type connection (as in the way a bayonet attaches to a rifle) and the NC for the inventors of the connector, Neil and Concelman.

This was last updated in August 2005

Continue Reading About BNC (Bayonet Neil-Concelman or British Naval Connector)

Dig Deeper on Network Infrastructure