Browse Definitions :
Definition

# decibel

In electronics and communications, the decibel (abbreviated as dB, and also as db and DB) is a logarithmic expression of the ratio between two signal power, voltage, or current levels. In acoustics, the decibel is used as an absolute indicator of sound power per unit area. A decibel is one-tenth of a Bel, a seldom-used unit named for Alexander Graham Bell, inventor of the telephone.

Suppose a signal has a power of P1 watts, and a second signal has a power of P2 watts. Then the power amplitude difference in decibels, symbolized SdBP, is:

SdBP = 10 log10 (P2 / P1)

Decibels can be calculated in terms of the effective voltage if the load impedance remains constant. Suppose a signal has an rms (root-mean-square) voltage of V1 across a load, and a second signal has an rms voltage of V2 across another load having the same impedance. Then the voltage amplitude difference in decibels, symbolized SdBV, is:

SdBV = 20 log10 (V2 / V1)

Decibels can also be calculated in terms of the effective current (amperage) if the impedance remains constant. Suppose a signal delivers an rms (root-mean-square) amperage of A1 through a load, and a second signal delivers an rms amperage of A2 through another load having the same impedance. Then the current amplitude difference in decibels, symbolized SdBA, is:

SdBA = 20 log10 (A2 / A1)

When a decibel figure is positive, then the second signal is stronger than the first signal. When a decibel figure is negative, then the second signal is weaker than the first signal. In amplifiers, the gain, also called the amplification factor, is often expressed in decibels. A circuit amplifies only if the decibel figure for the output-to-input power ratio (SdBP) is positive.

In sound, decibels are defined in terms of power per unit surface area on a scale from the threshold of human hearing, 0 dB, upward towards the threshold of pain, about 120-140 dB. As examples: the sound level in the average residential home is about 40 dB, average conversation is about 60 dB, typical home music listening levels are about 85 dB, a loud rock band about 110 dB, and a jet engine close up is 150dB.

Decibel units are commonly used in audio equalizers, both the hardware kind and the software kind, as a convenient reference point while editing. Boosting an equalizer band whose center point is 1000 by 3 dB means that you have raised the volume level of that frequency band by 3 dB as it relates to the other frequencies in the sound. A typical equalizer has a range for boosting or diminishing a sound level of +/-18 dB.

This was last updated in September 2005
• CIDR (Classless Inter-Domain Routing or supernetting)

CIDR (Classless Inter-Domain Routing or supernetting) is a method of assigning IP addresses that improves the efficiency of ...

• throughput

Throughput is a measure of how many units of information a system can process in a given amount of time.

• traffic shaping

Traffic shaping, also known as packet shaping, is a congestion management method that regulates network data transfer by delaying...

• Common Body of Knowledge (CBK)

In security, the Common Body of Knowledge (CBK) is a comprehensive framework of all the relevant subjects a security professional...

• buffer underflow

A buffer underflow, also known as a buffer underrun or a buffer underwrite, is when the buffer -- the temporary holding space ...

• single sign-on (SSO)

Single sign-on (SSO) is a session and user authentication service that permits a user to use one set of login credentials -- for ...

• benchmark

A benchmark is a standard or point of reference people can use to measure something else.

• spatial computing

Spatial computing broadly characterizes the processes and tools used to capture, process and interact with 3D data.

• organizational goals

Organizational goals are strategic objectives that a company's management establishes to outline expected outcomes and guide ...

• talent acquisition

Talent acquisition is the strategic process employers use to analyze their long-term talent needs in the context of business ...

• employee retention

Employee retention is the organizational goal of keeping productive and talented workers and reducing turnover by fostering a ...

• hybrid work model

A hybrid work model is a workforce structure that includes employees who work remotely and those who work on site, in a company's...

Close